Godox AD200Pro Outdoor Speedlite 200ws TTL HSS 1/8000s 2.4G Pocket Flash Strobe

Description

The new ad200Pro TTL flash is not just a mighty 200 watt second, fully cordless TTL strobe, with built-in 2.4GHz wireless, but a leap forward on the original ad200 "Pocket Flash" with interchangeable flash heads. This is the "Pro" version, with Stable Color Mode, ID Settings for Channel security, 1/10th stop precision, and advanced internal enhancements for the best portable flash experience you can imagine. The AD200 Pro TTL is triggered by godox triggers on-camera and in studio flashes, in TTL/M/Multi mode, forcorrect flash exposure even in complex light-changing environments. This proven performer is compatible with and automatically senses Canon, Nikon, Sony, Fujifilm, Pentax, Panasonic, and Olympus systems for remote power control and shooting. You can instantly snap in your personal shooting-style preference flash head, such as the traditional speedlite style Fresnel Head, the exciting Round Head with superior clean light spread, or choose to use to the Barebulb Head with an efficient parabolic reflector. The incredible amount of power and control in these compact and lightweight flashes, make this design the first choice ofprofessional photographers with an eye for flexible multiple light setup.
Godox 200 Pro Features:
Lightweight and portable. The greatest power in the most compact form
Produces up to 200ws, as much as 3 times more potent than speedlites in the same footprint
3 Studio quality interchangeable modular flash heads Fresnel, Bare Tube, Round Diffusion Head
Built-in 2.4GHz wireless radio TTL system with 330 foot range
Fully supports Canon ETTL II, Nikon iTTL, Sony TTL, Fujifilm, Pentax, Panasonic and Olympus TTL
IGBT firing allows for shorter flash durations, 1/8000s High-Speed Sync flash, and TTL
Rechargeable and Interchangeable 2900mAh Lithium Battery
Over 500 Full Power Flashes
Expanded Manual 9 stop range of power adjusts from full to 1/256 in 1/10th stop increments
FEC/FEB in 1/3rd stop increments over 6 stop range
LED Modeling with Fresnel and Optional Round Head
5 Groups
32 Channels
Stable Color Mode assures 5600°±100°K color temperature at over the entire power range
Super clear high-contrast info center
Improved no-twist tilt head 2 way stand mount
Specifications
Delay Flash: 0.01~30 seconds
ID function: OFF, 01~99
Mounting ：1/4"-20 Female Threads
Color Temperature：5600K (±200K)
Stroboscopic Flash: Up to 90 times, 99Hz
Connectors：3.5 mm Sync Input;Wireless Control Port
Stable Color Mode: 5600° ±100°K over the entire power range
Flash Exposure Compensation：±3 Stops in 1/3 Stop Increments
Built-in Slave Cell：S1 and S2 Optical Slave Modes;2.4 GHz Radio System
Optic Slave for Canon, Nikon ，Sony,Olympus,Panasonic,Fujifilm and Pentax
Flash Ready Indicator：LED, Beep;Flash Hibernates Automatically After 30 Minutes of Non-use
Sync mode: High-speed sync (up to 1/8000 seconds), first-curtain sync, and second-curtain sync
Guide No. (ft/m ISO 100): Speedlite flash head: 170ft/52m (ISO 100) 35mm coverage; Bare bulb flash head: 196ft/60m (ISO 100, with the standard reflector)
AD200PRO Features
Speedlite Head and Bare-Bulb Head
The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish or umbrella.
The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control.
Built-in 2.4G wireless X system
Compatible Cameras under Radio Transmission(as slave unit):
Nikon cameras(X1N as master unit)；
Cannon Eos cameras(X1C as master unit)；
Sony cameras(X1S as master unit)；
Fujifilm cameras(XIT-F as master unit);
Olympus&Pannasonic camera(X1T-O as master unit);
Large Capacity Lithium Battery Pack
The Removal rechargeable lithium battery Offers 500 Full Power Flashes with 0.01 to 1.8 sec. Recycling.
200Ws of Power Adjustable in 9 Steps from 1/256 to 1/1.
AD200PRO Features
Large AV Panel
High-Quality and Clear AV Panel Offers Convenient Operation.There is a thin protective film on the LED panel, please tear the film off after confirming that there is no problem with products.
Manual/TTL/Multi Flash Modes
The AD200 pro has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user's choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head's built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, Panasonic and Fuji cameras.
Stable color temperature
Stable color temperature at 5600±100K over the entire power range.
AD200PRO Features
1/4" Threaded Mounting Hole
The AD200 pro can be mounted via a 1/4" 20 threaded mounting hole on either side of the flash (allowing landscape or portrait orientation when using the speedlite head)
Lightweight & Portable
Lightweight and Pocket Size, Great Portability
Package Contents
1 x AD200 Pro Speedlight
1 x Bare Bulb Flash Head
1 x Lithium Battery
1 x Battery Charger
1 x Carry Case
1 x PERGEAR Diffuser
Godox AD200Pro TTL Pocket Flash Kit
Godox AD200 TTL Pocket Flash Kit
Godox Witstro H200R Round Flash Head
Godox AD200 AD200 Pro Battery
Flash Bag
Pergear Handheld Grip
Wireless Slave Unit Mode
Radio transmission mode(compatible with Nikon & Canon & Sony&Olympus&Panasonic&Fujifilm&Pentax)
Radio transmission mode(compatible with Nikon & Canon & Sony)
Compatible Cameras under Radio Transmission(as slave unit)
Nikon cameras(X1N as master unit)； Cannon Eos cameras(X1C as master unit)； Sony cameras(X1S as master unit)； Fujifilm cameras(XIT-F as master unit); Olympus&Pannasonic camera(X1T-O as master unit);
Nikon cameras(X1N as master unit)； Cannon Eos cameras(X1C as master unit)； Sony cameras(X1S as master unit)；
Flash Duration t0.1(approx.)
Speedlite flash head:1/220 to 1/15380seconds;Bare bulb flash head:1/220 to 1/13510 seconds.
Speedlite flash head:1/220 to 1/13000 seconds； Bare bulb flash head:1/220 to 1/11300 seconds.
Power output
9 steps:1/256~1/1
8 steps:1/128~1/1
ID
01-99
Recyle time
0.01-1.8s
approx. 0.01-2.1s
Color temperature Stable mode
±100k(within the entire power range)
Dimensions
172*54*75mm(flash head not included)
168*75*50mm(flash head not included)
Net weight
590g(flash head &battery not included）
560g(flash head &battery not included）
Powered by SoldEazy