-40%

Electro-Harmonix Flatiron Fuzz Guitar Effects Pedal Fuzz/Distortion - New

$ 40.28

Availability: 100 in stock
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back
  • Condition: New
  • Manufacturer: Electro-Harmonix
  • MPN: FLATIRON
  • Type: fuzz pedal
  • Item must be returned within: 30 Days
  • Restocking Fee: No

    Description

    Shop
    Favorite
    FAQ
    Policies
    Contact
    Electro-Harmonix Flatiron Fuzz Pedal
    Phantom48 is proud to be an Authorized Electro-Harmonix Dealer!
    The new Flatiron Fuzz is a classic op-amp powered fuzz/distortion. With its late ‘70s style circuit and symmetrical hard clipping, it’s EHX’s take on the RAT2™ pedal, only we think it’s better. The RAT2 is a trademark of Act Audio.
    The Flatiron Fuzz, an extremely versatile, classic op-amp powered pedal that can take you all the way from warm, round overdrive to full-on, fuzzy distortion. At lower drive settings the Flatiron Fuzz will remain fairly clean adding a pleasant mild drive. At medium and higher drive settings the Flatiron Fuzz can produce a thick classic tone circa the late ‘70s and far beyond. The expressive filter lets you dial in just the right amount of high-end...from dark to raunchy. The Flatiron Fuzz features true bypass.
    Electro-Harmonix trivia: the Flatiron Fuzz is named after the historic Flatiron Building in New York City. It’s an iconic landmark located just down the block from EHX headquarters in the 1970s and it’s the building pictured on your pedal.
    Key Features:
    DRIVE Knob — Controls the amount of input gain that goes into the fuzzcircuit. Turn the DRIVE clockwise to go from clean to high gain.
    FILTER Knob — Sets a low pass filter that tames the natural highs that are accentuated by the fuzz circuit. As the FILTER knob is turned clockwise, the filter’s frequency increases allowing more high-end to pass through the pedal.
    VOL Knob — Adjusts the output volume of the Flatiron Fuzz.
    FOOTSWITCH and LED — The footswitch toggles the Flatiron Fuzz between effect and true bypass mode. The LED lights when the effect is engaged.
    INPUT Jack — This 1/4” jack is the input to the Flatiron Fuzz. Plug your guitar into here. The input impedance is 1MOhm.
    AMP Jack — This 1/4” jack is the Flatiron Fuzz’s output. Connect this to the input of your next effect or amplifier. Output impedance varies from 500 Ohms to 25KOhms depending on the VOL Knob setting.
    POWER The Flatiron Fuzz can run off of a 9V battery or you can use an optional 9VDC AC Adapter capable of delivering at least 25mA to the 9V power jack, such as the EHX9.6DC-200. The AC Adapter must have a center negative plug. The battery may be left in or taken out when using an AC Adapter. The Flatiron Fuzz has a current draw of 5mA at 9VDC.
    Audio-Technica
    Bogner
    DigiTech
    Dunlop
    EarthQuaker Devices
    EBow
    Electro-Harmonix
    Emerson Custom
    Eventide
    Heil Sound
    Hosa Technology
    ISP Technologies
    JHS Pedals
    Lava Cable
    Mad Professor
    Maxon
    MXR
    On-Stage
    Peterson
    Power-All
    Radial Engineering
    Seymour Duncan
    Suhr
    TC Electronic
    TC-Helicon
    Wampler Pedals
    Way Huge Electronics
    Xotic Effects
    Contact Us
    Send us a message.
    About Phantom48
    Phantom48 is an Authorized Dealer for all of the new items we sell. We carefully monitor our stock to ensure item availability, and we process orders the same or next business day. Most orders ship for FREE. Send us an email with any tech support question. We own and operate a studio, and we have deep knowledge of computers and signal flow. If you have a question, don't hesitate to send us a message.
    Warranty Information
    Every item we sell is backed by the Manufacturer's Warranty. If you have any problems, we will replace your item immediately if a product arrives and it is not functioning.
    USA Customers:
    Because we are authorized dealers, your best option is to contact the manufacturer directly. At any rate, just contact us if you have problems, and we can advise what you should do.
    International Customers:
    Please note that our equipment carries a USA warranty, so all international warranty issues must be handled by Phantom48. All items must be returned to Phantom48 for all warranty repair or replacement issues. You will be responsible for all shipping/handling expenses.
    ***International Buyers Please Note:
    Import duties, taxes, and customs charges are not included in the item price or shipping cost. The charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.